FEP Resin (Aqueous Phase)
(C2F4)n.(C3H6)m
CAS No.：25067-11-2|
Item |
Technical Index |
||||
|
FJH-30 |
FJH-20 |
FJH-10 |
FJH-04 |
FJM-01 |
|
|
Appearance |
Uniform particles, no impurities such as metal chips and sand particles |
||||
|
Visible black dot number/% ≤ |
2 |
2 |
2 |
2 |
2 |
|
Melt flow rate/g/10min |
27-33 |
18-26 |
7-13 |
2-6 |
1.0-1.8 |
|
Tensile strength/MPa, ≥ |
18 |
18 |
22 |
25 |
27 |
|
Elongation at break/% ≥ |
280 |
280 |
300 |
300 |
320 |
|
Melting point/℃ |
260±15 |
265±15 |
|||
|
Volatile/% ≤ |
0.2 |
||||
|
Specific gravity |
2.12-2.17 |
||||
|
Dielectric constant(106Hz) ≤ |
2.15 |
||||
|
Dissipation factor(106Hz) ≤ |
7.0×10-4 |
||||
- FEP is a copolymer of tetrafluoroethylene and hexafluoropropylene with excellent electrical insulation properties, thermal and chemical stability and good processing properties.
- Aqueous Phase FEP is a polyperfluoroethylene propylene (PFPE) resin that is emulsion polymerized and granulated for molding and extrusion processing.
- FJH-30：Mainly used for high temperature resistant ultra-fine wires, high-speed cable and small specifications usb cable, and communication cable.
- FJH-20：Mainly used for a variety of small size electronic wire, high temperature resistant cable, and communication cable.
- FJH-10：Mainly used for the sheath of large size high temperature resistant wire, electronic wire and communication cable.
- FJH-04：Mainly used for pipes which require high temperature and abrasion resistance.
- FJM-01：Mainly used for molding processing products, such as: valves, pumps, pipe lining.
• 25kg/carton;
• It is supplied as translucent pellet, packed in double strengthen plastic bag or packed in PE plastic bag then put in hard carton barrel;
• The product should be stored in a clean, cool and dry place to prevent rain, sunlight, moisture, dust and other impurities from mixing.
FEP Resin